BR-Automation Automation PC 820, User Manual, Page: 37 / 252

Technical data • Entire device
Chap
ter 2
Te
chn
ica
l da
ta
37 Automation PC 820 User's Manual V 1.00
2.2.2 Temperature sensor position
Sensors indicate temperature values in many different areas in the APC820. The temperatures
1)
can be read in BIOS (menu item "Advanced" - Baseboard/panel features - Baseboard monitor
on page 125) or in Microsoft Windows XP, using the B&R Control Center
2)
.
1) The measured temperature is a guideline for the immediate ambient temperature, but can be influenced by neighboring components.
2) The B&R Control Center - ADI driver - can be downloaded for free from the download area on the B&R homepage
( www.br-automation.com ).
Figure 10: Temperature sensor position
Position Measurement point for Measurement Max. specified
1 CPU Processor temperature (integrated on the processor). 95°C
2 CPU board Temperature on the CPU board close to the processor. 85°C
3 Baseboard Out Temperature of the board in the top area. 80°C
4 Baseboard Center Temperature of the board in the middle area. 80°C
5 Baseboard In Temperature of the board in the bottom area. 65°C
6 Power supply Power supply temperature. 85°C
IF slot (PCIec card slot) Temperature of the PCIec slot; the sensor is located directly on the plug-in card. Depending on the
plug-in cards used
Table 13: Temperature sensor position
3
4
5
1
2
6