BR-Automation Automation PC 820, User Manual, Page: 136 / 252

136
Software • BIOS options
Automation PC 820 User's Manual V 1.00
1.10 BIOS default settings
The CMOS Profile Hex switch (for position, see the figure "CMOS profile switch" on page 59) can
be used to load pre-defined BIOS profile settings based on the position.
If the function "load setup defaults" is chosen in the main BIOS setup menu, or if exit is selected
(or <F9> is pressed) in the individual setup screens, the following BIOS settings are the
optimized values that will be used.
The following pages provide an overview of the BIOS default settings for the different CMOS
profile switch position. Yellow highlighted settings are variations in the BIOS default profile
(=profile 0).
Figure 60: BIOS default settings - CMOS switch
Information:
The switch position that is set upon delivery represents the optimum BIOS default
values for this system and should therefore not be changed.
Profile number Optimized for Switch position Note
Profile 0 Reserved 0
Profile 1 System unit - 5PC810.SX01-00 /
5PC810.SX02-00 1 The default settings for this profile
can be found in the APC810 user's
manual. This can be downloaded for
free from the B&R homepage.
Profile 2 System unit 5PC810.SX05-00 2
Profile 3 System unit - 5PC820.SX01-00 3
Profile 4 Reserved 4
Profile 5 Reserved 5
Table 90: Profile overview
CMOS profile
switch