manualshive.com logo in svg

BR-Automation Automation PC 820, User Manual, Page: 165 / 252

Share
Download
BR-Automation Automation PC 820 User Manual Download Page 165

Software • Automation PC 820 with Windows XP Professional

Ch

apte

r 4

Soft

w

are

165

Automation PC 820 User's Manual V 1.00

4. Automation PC 820 with Windows XP Professional

Figure 73: Windows XP Professional Logo

Model number

Short description

Note

5SWWXP.0600-GER

WinXP Professional with SP3, GER

Microsoft OEM Windows XP Professional Service Pack 3, CD, German. Only available with 
a new device.
A CompactFlash card is required for operation. This is not included in delivery and must be 
ordered separately.

5SWWXP.0600-ENG

WinXP Professional with SP3, ENG

Microsoft OEM Windows XP Professional Service Pack 3, CD, English. Only available with a 
new device.
A CompactFlash card is required for operation. This is not included in delivery and must be 
ordered separately.

5SWWXP.0600-MUL

WinXP Professional with SP3, MUL

Microsoft OEM Windows XP Professional Service Pack 3, CD, multi-language. Only available 
with a new device.
A CompactFlash card is required for operation. This is not included in delivery and must be 
ordered separately.

5SWWXP.0500-GER

WinXP Professional with SP 2c, GER

Microsoft OEM Windows XP Professional Service Pack 2c, CD, German. Only available with 
a new device.
A CompactFlash card is required for operation. This is not included in delivery and must be 
ordered separately.

5SWWXP.0500-ENG

WinXP Professional with SP 2c, ENG

Microsoft OEM Windows XP Professional Service Pack 2c, CD, English. Only available with 
a new device.
A CompactFlash card is required for operation. This is not included in delivery and must be 
ordered separately.

5SWWXP.0500-MUL

WinXP Professional with SP 2c, MUL

Microsoft OEM Windows XP Professional Service Pack 2c, CD, multi-language. Only 
available with a new device.
A CompactFlash card is required for operation. This is not included in delivery and must be 
ordered separately.

Table 116: Model numbers - Windows XP Professional

Summary of Contents for Automation PC 820





























































































































































































































































Reviews:

No comments