BR-Automation Automation PC 820, User Manual, Page: 155 / 252

Software • Upgrade information
Ch
apte
r 4
Soft
w
are
155 Automation PC 820 User's Manual V 1.00
Which firmware is installed on the Automation Panel Link transmitter?
This information can be found on the following BIOS setup page:
• After switching on the APC820, you can get to the BIOS Setup by pressing "Del".
• From the BIOS main menu "advanced", select "baseboard/panel features" and then
"panel control".
Information:
The version can only be displayed when an Automation Panel is connected. TBD
Figure 64: Firmware version of the AP Link SDL transmitter
Advanced
Panel Control Panel 0-14: connected
to Automation Panel
Link or Monitor/Panel
connector.
Brightness: [100%] Panel 15: connected on
Panel PC Link.
Note: DVI and PPC Link
will show no valid
values. On PPC Link
only the brightness
option will work.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Select Panel Number [0]
Version: V1.04
Temperature: 41°C/105°F
Fan Speed: 00 RPM
Keys/Leds: 128/128
BIOS SETUP UTILITY
v02.59 (C)Copyright 1985-2005, American Megatrends, Inc.
Firmware of the
SDLR Controller