BR-Automation Automation PC 820, User Manual, Page: 172 / 252

172
Software • Automation Device Interface (ADI) - Control Center
Automation PC 820 User's Manual V 1.00
6.2 Installation
The latest version of the ADI driver for the existing target system can be found in the download
area (Service - Material Related Downloads - BIOS / Drivers / Updates) on the B&R homepage
(
www.br-automation.com ).
1. Download and unzip the ZIP archive
2. Close all applications
3. Run BrSetup.exe (e.g. double-click on it in Explorer).
- or -
Right click on BrSetup.inf in explorer and select "Install".
6.3 SDL equalizer setting
The equalizer makes it possible to adjust the strength of the video signal to the SDL cable length.
This allows you to improve the visual representation on the display. The SDL equalizer can be
set under the "Display" tab under "Settings".
The value is optimally defined for the cable length when using the "Automatic setting".
The equalizer value can only be changed if the function is supported by the Automation Panel.
Information:
The ADI driver and B&R control center are already included in the Windows XP
Embedded operating system.
If a more current ADI driver version exists (see the B&R homepage download area),
it can be installed later. A potentially activated "Enhanced Write Filter (EWF)" must
be taken into consideration when installing.
Figure 76: ADI Control Center - SDL equalizer settings