BR-Automation Automation PC 820, User Manual, Page: 126 / 252

126
Software • BIOS options
Automation PC 820 User's Manual V 1.00
Legacy devices
Baseboard In Displays the temperature in the lower part
of the baseboard in degrees Celsius and
Fahrenheit. None -
Power supply Displays the temperature in the power
supply in degrees Celsius and Fahrenheit. None -
IF slot Displays the temperature near the IF slot
in degrees Celsius and Fahrenheit. None -
Case 1 Displays the fan speed of housing fan 1. None -
Case 2 Displays the fan speed of housing fan 2. None -
Case 3 Displays the fan speed of housing fan 3.
Information:
The APC820 only has 2 housing fans,
which means this value is not relevant.
None -
Case 4 Displays the fan speed of housing fan 4.
Information:
The APC820 only has 2 housing fans,
which means this value is not relevant.
None -
Figure 53: 945GME Legacy Devices
BIOS setting Meaning Setting options Effect
Table 82: 945GME Baseboard Monitor setting options
Advanced
Legacy Devices Enable/Disable the
COM 1 port.
Base I/O address: [3F8]
Interrupt: [IRQ 4]
COM B: [Enabled]
Base I/O address: [2F8]
COM C: [ ]
Hardware Security Key
Interrupt: [IRQ 3]
Disabled
Select Item
Select Screen
: [Enabled] +- Change Option
Base I/O address [378] F1 General Help
F10 Save and Exit
ETH2 LAN controller: [Enabled] ESC Exit
COM A: [Enabled]
ETH2 MAC Address: 00:60:65:07:90:BC
BIOS SETUP UTILITY
v02.59 (C)Copyright 1985-2005, American Megatrends, Inc.