BR-Automation Automation PC 820, User Manual, Page: 124 / 252

124
Software • BIOS options
Automation PC 820 User's Manual V 1.00
Panel control
Product name Displays the B&R model number. None -
User serial ID Displays the user serial ID.
This 8 digit hex value can be freely
assigned by the user (e.g. to give the
device a unique ID) and can only be
changed with using the "B&R Control
Center" via the ADI driver. None -
Figure 51: 945GME Panel Control
BIOS setting Meaning Setting options Effect
Select panel number Selection of the panel number for which
the values should be read out and/or
changed. 0...15 Selection of panel 0 ... 15.
Panel 15 is specifically intended for panel PC 700
systems
Version Displays the firmware version of the SDLR
controller. None -
Brightness For setting the brightness of the selected
panel. 0%, 10%, 20%, 30%,
40%, 50%, 60%, 70%,
80%, 90%, 100%
For setting the brightness (in %) of the selected
panel. Changes take effect after saving and
restarting
the system (e.g. by pressing
<F10>).
Table 81: 945GME Panel Control setting options
BIOS setting Meaning Setting options Effect
Table 80: 945GME Advanced Baseboard/Panel Features setting options (cont.)
Advanced
Panel Control Panel 0-14: connected
to Automation Panel
Link or Monitor/Panel
connector.
Brightness: [100%] Panel 15: connected on
Panel PC Link.
Note: DVI and PPC Link
will show no valid
values. On PPC Link
only the brightness
option will work.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Select Panel Number [0]
Version: V1.14
Temperature: 41°C/105°F
Fan Speed: 00 RPM
Keys/Leds: 128/128
BIOS SETUP UTILITY
v02.59 (C)Copyright 1985-2005, American Megatrends, Inc.