Instructions for use, ERGO 300 - BOWA- IFU-12930- ERG0300-S0-EN-20210701 41
8.5
Fault messages on the display
Failure report
Cause
Solution
Motor failure
Switch device off and on again.
The device detected undervoltage
while the motor was running.
The pedal must be released for a short
period.
Pedal was pressed while switching on
the device.
The pedal must be released for a short
period.
If a fault cannot be rectified, please contact your supplier or an authorized service center.
The addresses are provided on the last page of the operating instructions.
