Instructions for use, ERGO 300 - BOWA- IFU-12930- ERG0300-S0-EN-20210701 23
Available speed modes
« » (LOW, 100 – 400 rpm)
« » (MEDIUM, 300 – 700 rpm)
« » (HIGH, 500 – 1000 rpm)
Activating mode setting
Press « » to activate mode setting.
The VARIO LED lights up.
The LOW LED lights up. (Default setting)
The display shows «VARIO LOW, 100 – 400 rpm».
Selecting mode
Press « », « » or « » to select the corresponding mode.
The display shows the mode and the corresponding speed range that
can be selected with the pedal.
The corresponding LED lights up.
Starting the motor
Press pedal. The motor LED lights up. The blade rotates
at a speed within the range, set by how far down the pedal is pressed.
To stop the motor remove foot from pedal.
Exit mode setting
Press « ».
Changing direction of rotation
To change the direction of rotation, press « » .
The device confirms the change of rotation direction with a signal tone
and on the display it is sybolized with two arrows.
The display shows the mode and the corresponding
speed range that can be selected with the pedal.
The corresponding LED lights up.
Display values
The values shown on the display are speed ranges, which can be called up by pedal.
In operation the display does not show any current speed values.
The values described can deviate from the actual values by a maximum of 10 %.
