manualshive.com logo in svg

Bosch Rexroth IndraMotion MTX 09VRS, Manual

Share
Download
Bosch Rexroth IndraMotion MTX 09VRS Manual Download Page 157

9 

System Switching

9.1 

Channel Dialog Box

9.1.1 

Application

The channel dialog box serves for 2 purposes:
●

Switching between operation and display channels

●

Displaying the selected channel information of all the channels of a control

system (channel overview).

Channels that have been hidden using the configuration are not shown.

Fig.9-1:

Channel dialog box in the user interface

The Channel dialog box is an application with its own F-key assignment.
The menu and the title line are hidden.
The Channel dialog box is retrieved by pressing the <OP6> "system" key.
The M-keys act as "global M-keys" on the channel that is displayed in the ma‐

chine status area (active channel).

9.1.2 

General Structure of the Channel Dialog Box

Depending on the number of channels, 2 types of display are possible.
If more channels exist than can be displayed in the default setting, a compact

display is also offered.

Application Description | Rexroth IndraMotion MTX 09VRS

 Electric Drives

and Controls

| Bosch Rexroth AG 145/233

System Switching

Position of the Channel Dialog Box

in the User Interface

Summary of Contents for Rexroth IndraMotion MTX 09VRS

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands