manualshive.com logo in svg

Bosch Rexroth IndraMotion MTX 09VRS, Manual

Share
Download
Bosch Rexroth IndraMotion MTX 09VRS Manual Download Page 115

7.

Complete the entry by pressing the "Ok" button.

The new axis is added according to the settings.

●

If the new axis is to be attached at the end, any cell can be

selected.

●

The "Add axis" dialog box can be cancelled at any time by

pressing the "Cancel" button.

This deletes an axis from the zero offset table.
1.

Select the desired axis (i.e. any cell of the axis has to be selected).

2.

Press the <F3> "Delete axis" key.
The selected axis is highlighted and a security query regarding the deletion

of the axis is displayed.

3.

Acknowledge deletion by pressing the "Yes" button.
The selected axis is deleted.
– or –
Cancel deletion by pressing the "No" button.
Function "Delete axis" is cancelled.

The Function "Edit axis" can be used to change the name and type of an axis.

Fig.7-13:

Dialog box for editing an axis

1.

Select the desired axis (i.e. any cell of the axis has to be selected).

2.

Press the <F4> "Edit axis" key.
The selected axis is highlighted and a dialog box for changing the name

and type of the axis is displayed (see 

fig. 7-13 " Dialog box for editing an

axis" on page 103

).

3.

If necessary, edit the axis name.

4.

If necessary, select a new axis type.

5.

If necessary, specify a special channel ("0" for all).

6.

Clicking the "Ok" button completes editing.
Changes to the axis are immediately visible in the table.

The "Edit axis" dialog box can be cancelled at any time by pressing

the "Cancel" button.

7.4.4 

D-Corrections

General Information on D-Corrections

The D-correction editor can be used to display and change length correction

values L1, L2, L3, the radius correction value R and the edge position for the

various D-correction data sets. In addition, a comment with a maximum of 32

characters can be assigned to each correction block.

Application Description | Rexroth IndraMotion MTX 09VRS

 Electric Drives

and Controls

| Bosch Rexroth AG 103/233

Programming

Delete Axis

Edit Axis

Summary of Contents for Rexroth IndraMotion MTX 09VRS

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands