Bosch Rexroth Indramat BTV30.2, Project Planning Manual, Page: 82 / 94

13-2
List of Figures BTV30.2
DOK-MTC200-BTV30.2****-PR02-EN-P
Fig. 9-5: General Specifications 9-3
Fig. 9-6: AMIBIOS Key-Functions 9-5
Fig. 9-7: AMIBIOS Setup Main Menu 9-5
Fig. 9-8: Setup Types 9-6
Fig. 9-9: Standard Setup 9-6
Fig. 9-10:Primary Master Hard Disk 9-6
Fig. 9-11:Advanced Setup 9-7
Fig. 9-12:Chipset Setup 9-8
Fig. 9-13:Power Management Setup 9-9
Fig. 9-14:PCI / PnP Setup 9-9
Fig. 9-15:Inside utilities 9-11
Fig. 9-16:Beep Codes 9-13
Fig. 9-17:Installation of a SIMM Module Figure A 9-14
Fig. 9-18:Installation of a SIMM Module Figure B 9-14
Fig. 10-1:Type code BTV30.2 10-1
Fig. 10-2:Configuration type code BTV30.2C 10-2
Fig. 10-3:Configuration type code BTV30.2S 10-3
Fig. 10-4:Configuration type code BTV30.2E 10-4
Fig. 10-5:Configuration type code BTV30.2P 10-5
Fig. 10-6:Configuration type code BTV30.2T 10-5
Fig. 11-1:Connector and cable accessories of the BTV20 11-1
Fig. 11-2: Connector pin assignments of the confection interface
connectors 11-2
Fig. 11-3:Ethernet card PCM-E01.1 11-3
Fig. 11-4:Type code PCM-E01 11-4
Fig. 11-5:Technical data 11-4
Fig. 11-6:Connector PCM-E01.1 11-5
Fig. 11-7:RJ45 port 11-5
Fig. 11-8:Pin assignment of the RJ45 port 11-5
Fig. 11-9:AUI port 11-6
Fig. 11-10: Assignment of the AUI port 11-6
Fig. 11-11: Meaning of the LED display 11-6
Fig. 11-12: Screen to select the Ethernet adapter 11-8
Fig. 11-13: Screen to select the bus 11-8
Fig. 11-14: Configuration screen 11-9