Bosch Rexroth Indramat BTV30.2, Project Planning Manual, Page: 8 / 94

1-2
System Presentation BTV30.2
DOK-MTC200-BTV30.2****-PR02-EN-P
The display is protected by a pane of glass that complies with the EMC
requirements.
The BTV30.2 unit is suitable for surface mounting and for base
installation. Together with the optically and dimensionally compatible
BTM15 and BTM16 machine control panels, you can set up a modern and
attractive control panel in a flat or raised form.
1.3 Standard Configuration
•
SLOT-CPU min. 300 MHz with integrated graphic controller,
4 MB video memory
•
64 or 128 MB work memory
•
min. 3 GB hard disk
•
3,5" disk drive
•
10,4" TFT color display
•
Power supply 115 - 230 VAC
•
1x serial Interface RS232
•
1x RS232, RS485, RS422 to Indramat standard (SIS)
•
1x parallel interface (LPT1)
1.4 Additional Modules
The following additional modules are currently available:
•
PLC module with BT-Bus
•
CNC module with SERCOS fiber optics interface
•
10 / 100 MBit Ethernet-Card PCM-E01.1
The configuration type code gives you all the currently available
configurations (see page 10-2).
1.5 Operating System
•
For license reasons, the BTV30.2 unit is only delivered with an
installed operating system. As operating system WindowsNT 4.0 is
available
•
In addition to the operating system, the user interface of an MTC200
CNC controller or an ISP200 PLC controller can also be pre-installed.