Bosch Rexroth Indramat BTV30.2, Project Planning Manual, Page: 43 / 94

BTV30.2 Connection Pin Assignment
7-5
DOK-MTC200-BTV30.2****-PR02-EN-P
7.3 Realisation of the BTV30 PC version
On the PC variant of the BTV30 unit, the unit only contains the CPU
module. Controllers are not installed here. In the type code, this variant is
identified by a
"P " at position 4 (function type). In addition, the TM plug-in
module is employed. This module leads the machine function keys
directly to a 9 pin Sub-D connector on the outside of the unit (see Fig. 7-
10)
Machine function keys
UE2 UE1 U1 U2
X1
12 VDC OUT
3,0 A MAX.
F1
3,1 A T
X4
R1-R8
BTV30_Softkeys.fh7
Fig. 7-10: External connection of the machine function keys
Connector pin assignments
On the following table you see which key on which pin of the connector
can be catched.
Pin Signal name
1 Key R1
2 Key R3
3 Key R5
4 Key R7
5 +24V DC
6 Key R2
7 Key R4
8 Key R6
9 Key R8
Fig. 7-11: Sub-D - connector pin assignments