Bosch Rexroth Indramat BTV30.2, Project Planning Manual, Page: 37 / 94

BTV30.2 Front Panel, Keyboard
6-7
DOK-MTC200-BTV30.2****-PR02-EN-P
On interface 21VRS
As from software version 21VRS a logical number has to be assigned to
each device as well as to all machine function keys. Use the IO editor of
the programming interface to assign to the numbers (see Fig. 6-11).
Depending on the application the device number can be different. For this
reason, the succeeding table is marked with a star (*).
Machine function keys Address
R1 %I*.1.0
R2 %I*.1.1
R3 %I*.1.2
R4 %I*.1.3
R5 %I*.1.4
R6 %I*.1.5
R7 %I*.1.6
R8 %I*.1.7
Fig. 6-10: Addressing the machine function keys as from interface 21VRS
A configuration example of the IO editor is shown in the following picture.
IO_Editor.bmp
Fig. 6-11: IO editor of the programming interface 21VRS