Bosch Rexroth Indramat BTV30.2, Project Planning Manual, Page: 56 / 94

9-8
SLOT-CPU Card BTV30.2
DOK-MTC200-BTV30.2****-PR02-EN-P
Chipset Setup
USB Function Disabled
USB Keyboard/Mouse Legacy Support Disabled
USB Passive Release Enable Enabled
Global Triton2 Enable Enabled
Memory Hole Disabled
8Bit I/O Recovery Time (Sysclk) 1
16Bit I/O Recovery Time (Sysclk) 1
DRAM Timings 70 ns
Refresh Rate 66MHz
Turbo Read LeadOff Disabled
Read Burst Timing X333
Write Burst Timing X333
Fast RAS to CAS Delay (Clocks) 3
LeadOff Timing 7 / 6 / 3 / 4
Turbo Read Pipelining Disabled
Speculative LeadOff Disabled
Turn-Around Insertion Disabled
Memory Address Drive Strength 8ma / 8ma
TypeF DMA Buffer Control1 Disabled
TypeF DMA Buffer Control2 Disabled
NA Disable (NAD) for Ext Cache Enabled
Peer Concurrency Enabled
DRAM Data Integrity Mode Parity
PCI 2.1 Passive Release Enable Disabled
Delayed Transaction Enable Disabled
North Bridge Retry Enable Enabled
Fig. 9-12: Chipset Setup
Power Management Setup
Power Management / APM Disabled
Instant-On Timeout (Minute) Disabled
Green PC Monitor Power State Standby
Video Power Down Mode Standby
Hard Disk Power Down Mode Suspend
Hard Disk Time Out (Minute) Disabled
Standby Time Out (Minute) 1
Suspend Time Out (Minute) 1
Slow Clock Ratio 1 : 8
IRQ3 Ignore
IRQ4 Ignore
IRQ5 Ignore
IRQ7 Ignore