Bosch Rexroth Indramat BTV30.2, Project Planning Manual, Page: 59 / 94

BTV30.2 SLOT-CPU Card
9-11
DOK-MTC200-BTV30.2****-PR02-EN-P
Temperature violation action CPU Speed
Fan overload limit, Act: 60mA 299
Fan disconnect or overload action Speaker
OnBoard IDE Primary
Fig. 9-15: Inside utilities
Note 1: Resolution: 640 x 480
Technology: TFT Color
Manufacture: Toshiba
Code: LTM10C209
Security
Three icons appear in this part of the AMIBIOS Setup screen:
•
Supervisor (Password),
•
User (Password), and
•
Anti-Virus.
Both the Supervisor and the User icons configure password support. If
you use both, the Supervisor password must be set first.
The system can be configured so that all users must enter a password
every time the system boots or when AMIBIOS Setup is executed, using
either or both the Supervisor password or User password.
AMIBIOS Password Support
The Supervisor and User icons activate two different levels of password
security.
If AMIBIOS Setup has an optional password feature. The system can be
configured so that all users must enter a password every time the system
boots or when AMIBIOS Setup is executed.
Setting a Password
The password check option is enabled in Advanced Setup by choosing
either
Always (the password prompt appears every time the system is
powered on) or Setup (the password prompt appears only when AMIBIOS
is run). The password is encrypted and stored in CMOS memory.
You are prompted for a 1 – 6 character password. You can either type the
password on the keyboard or select each letter of the password, one at a
time, using the mouse. The password does not appear on the screen
when typed. Make sure you write it down. If you forget it, you must drain
CMOS memory and reconfigure.
Note: If You Do Not Want to Use a Password Press <Enter> when
the password prompt appears.
Two Levels of Passwords