Bosch Rexroth Indramat BTV30.2, Project Planning Manual, Page: 74 / 94

11-6
Accessories BTV30.2
DOK-MTC200-BTV30.2****-PR02-EN-P
AUI port
The AUI port is a 15 pin D-Sub female connector with sliding interlock.
1
8
9
15
Aui.fh7
Fig. 11-9: AUI port
Pin Signal name Pin Signal name
1 Collision shield 9 Collision -
2 Col 10 Transmit -
3 Tr 11 Transmit shield
4 Receive shield 12 Receive -
5 R 13 + 12 V
6 Power return 14 Voltage shield
7 N. C. 15 N. C.
8 N. C.
Fig. 11-10: Assignment of the AUI port
BNC port
The BNC port is provided for the connection of a 50 ohm coaxial cable.
The connection has to be realized with a T-piece. Thus, the computer can
be looped into a network line.
In the case of an end device (no second branching line) a 50 ohm
termination resistance has to be connected to the free outlet.
Link LED
The PCM01 has a LED to indicate the connection status of the 10Base-T
interface. The display has the following meaning:
LED on If a network driver is installed, an active connection is indicated.
If no network driver is installed, it is indicated that the connection
to the hub is realized.
LED off No connection to the hub.
LED flashes Cable error (polarity ?)
Fig. 11-11: Meaning of the LED display
As the LED is not placed on the same level of the slot sheet, it is difficult
to recognize when the housing is closed.