Bosch Rexroth Indramat BTV30.2, Project Planning Manual, Page: 51 / 94

BTV30.2 SLOT-CPU Card
9-3
DOK-MTC200-BTV30.2****-PR02-EN-P
General Specifications
Dimensions 249.7 mm x 122.9 mm x 20.0-35.0 mm
Ambient Conditions
0
°
C - 60
°
C operating temperature (forced cooling)
10% - 90% relative humidity (non-condensing)
Plug and Play Features All configuration is done by software (Automatic or user-setup)
Automatic processor type detection and setup.
Automatic remapping of on-board peripherals, if conflicts with off-board
controllers are detected.
Flat Panel Interface Active color TFT, SS, 9/12/15/16/18/24 bit.
Ethernet 10M bit 10BASE-T. Controller on PCI bus with master access
capabilities
USB Universal Serial Bus. 12 Mbit
BIOS System: American Megatrends, Industry standard, 128kB
- Video: Chips & Technologies, 44kB
- INSIDE BIOS extens.: Setup utility & SSD code, 64kB
Watchdog circuit Supervision of power supply and program execution
Startup delay. Service interval can be selected
Real-Time-Clock and CMOS Memory Date, time and system config. (with battery backup)
Secure CMOS option Security backup of CMOS memory within Flash BIOS for auto reload, if
CMOS memory is lost
On-board Peripheral interfaces
AT-keyboard interface,
2 x RS232C or 1 x RS232C and 1 x RS/485 serial communication
interface supported by NS16550 comp. UART’s,
1 x Parallel printer interface (Centronic, ECP, EPP mode).
EIDE hard disk interface
Floppy drive interface (2 x 360kB to 1.44MB)
Standard VGA Controller with Flat Panel Port.
Fig. 9-5: General Specifications