Bosch Rexroth Indramat BTV30.2, Project Planning Manual

Page: 75 / 94

BTV30.2 Accessories
11-7
DOK-MTC200-BTV30.2****-PR02-EN-P
Installation
Hardware installation
Note: The Ethernet card PCM_E01.1 is inserted when the card is
delivered. Normally, a hardware installation is not necessary.
In the case that the card has to be mounted or dismounted please
proceed as follows:
1. Switch off the PC.
2. Open the PC housing.
3. Select a free ISA slot.
4. Remove the blind cover in the fixation cage.
5. Insert the PCM card in the connector.
6. Lock the card in the fixation cage with a screw.
7. Realize the network connection (Don’t forget the termination
resistance, if you use the BNC female connector!).
When dismounting the card reverse the order of the explained steps.
Software installation
Note: The Ethernet card PCM_E01.1 is not yet initialized when the
card is delivered. The drivers have to be installed and
configuration settings have to be made. Thereby, please
proceed as follows:
Installation of the network card using Microsoft Windows NT4.0
1. Start Windows NT.
2. Select icon "Network" in the menu Settings/Control Panel.
3. Select menu item "Adapters".
4. Select:
"Add".
5. Select "diskette".
6. Chose the following directory: C:\Driver\1T_3C509.
7. Select "3Com Etherlink III (3c509) ISA Adapter" in the selection box
(see Fig. 11-12).