Bosch Rexroth IndraDrive C HCS03.1, Planning Manual

Page: 71 / 86

Rexroth IndraDrive C HCS03.1 Replacing Devices
8-5
DOK-INDRV*-HCS03.1****-PR02-EN-P
General conditions:
Mode at time fault occurred: Parameterization mode
Operating mode Switch phase
Operating mode active at time fault occurred: ,
Encoder ,
7-segment display... ...before fault occurred:
...after fault occurred:
Fault status
occurs permanently
occurs during commissioning
occurs sporadically
occurs after approx. hours
occurs with shocks
depends on temperature
Causes
unknown
incorrect connection
external cause
mechanical damage
loose cable connection
moisture in unit
foreign body in unit
Other defects
problems in the mechanical system
power section failure
control system failure
motor failure
cable break
defective blower
defective feedback
Wiring / mechanical setup (e. g. length of cables, grounding, assembly,...):
Information on the machine (e. g. operating hours, type, serial number,...):
Mains conditions (e. g. frequency, voltage,...):
Ambient conditions (e. g. ambient temperature, humidity,...):
In case of problems with DriveTop
Name of dialog in which fault occurred:
Drive connection:
Note: In order to resolve your DriveTop problem quickly, we would like to ask you to send us the file
"debug.log". You can find it in the DriveTop directory.
Fig. 8-1: Fault report