Bosch Rexroth IndraDrive C HCS03.1, Planning Manual

Page: 3 / 86

Rexroth IndraDrive C HCS03.1 Contents
I
DOK-INDRV*-HCS03.1****-PR02-EN-P
Contents
1 Indroduction 1-1
1.1 Documentation.............................................................................................................................. 1-1
About this Documentation ....................................................................................................... 1-1
Documentations - Overview .................................................................................................... 1-2
1.2 Basic Design of a Drive Controller................................................................................................ 1-3
1.3 General Information on How to Install the Drive Controller .......................................................... 1-5
2 Important Directions for Use 2-1
2.1 Appropriate Use ............................................................................................................................ 2-1
Introduction .............................................................................................................................. 2-1
Areas of Use and Application .................................................................................................. 2-2
2.2 Inappropriate Use ......................................................................................................................... 2-2
3 Safety Instructions for Electric Drives and Controls 3-1
3.1 Introduction ................................................................................................................................... 3-1
3.2 Explanations ................................................................................................................................. 3-1
3.3 Hazards by Improper Use............................................................................................................. 3-2
3.4 General Information ...................................................................................................................... 3-3
3.5 Protection Against Contact with Electrical Parts........................................................................... 3-4
3.6 Protection Against Electric Shock by Protective Low Voltage (PELV) ......................................... 3-6
3.7 Protection Against Dangerous Movements .................................................................................. 3-6
3.8 Protection Against Magnetic and Electromagnetic Fields During Operation and
Mounting ....................................................................................................................................... 3-8
3.9 Protection Against Contact with Hot Parts.................................................................................... 3-9
3.10 Protection During Handling and Mounting.................................................................................... 3-9
3.11 Battery Safety ............................................................................................................................. 3-10
3.12 Protection Against Pressurized Systems.................................................................................... 3-11
4 Identification 4-1
4.1 Device Types ................................................................................................................................ 4-1
Type Code ............................................................................................................................... 4-1
4.2 Type Plates ................................................................................................................................... 4-2
Type Plate Power Section (Example)...................................................................................... 4-3
Type Plate Control Section...................................................................................................... 4-3
4.3 Scope of Delivery.......................................................................................................................... 4-3
Overview.................................................................................................................................. 4-3