Communication with ID 200/C-PDP 47/84
3 842 540 399/2016-11, MIT: ID 200,
Bosch Rexroth AG
If version information is requested by
<Sensorchannel>, the reply contains the status 0
with no further data.
With
<RFIDChannel> = 0, the trigger signal can be assigned to channel ‘0’. In this case, the
trigger signal is transmitted to the control and not to an antenna.
This function can be used, for example, to carry out function monitoring via the PLC
if the trigger signal and reading of the data cannot take place at the same time for
reasons specific to the application. The correlation must take place in the PLC.
EN
GLISH
