1 690 326 006
2008-8-25
|
Robert Bosch GmbH
Operating System-Software | FWA 43xx / 44xx | 55
en
File description
Licence.exe - Executable program file
R
Licence.ini - Configuration settings of the licence
R
server
Configuration settings LICENCE.ini
[Settings]
Entry
Legend
Port=1085
TCP/IP Port number
Tab. 20:
Program
Context menu
Fig. 29:
1. Status and activities of the program
2. Port address as server
3. Program info
4. Ending the program.
Context menu
The program runs in background. Apparently through
R
the yellow program symbol "L" in the right taskbar.
By right clicking on this symbol, a dialogue opens
with the entries.
Stopping the licence server. Verification cannot be
R
executed with the real-time data during the runtime
of the main program. You will receive an error
message. The target databank shall be closed and
a verification is possible only in demo mode.
License Status
Fig. 30:
1. Displays the number of connections to the server during the
entire runtime of the server after starting the program. In normal
case number amounts 1 = Connection to main program.
2. Displays the number of the queries of the main program to the
license server during the entire runtime of the server from the
start of the program. Normally this figure will steadily increase.
3. Displays the number of connections to the license server in real
time. Possibly, here, it can be 0 or 1, as long as it has been
however asked for, only number 1 is allowed.
License Properties
Fig. 31:
License Properties displays the Software connection
R
port for the license server. Here, the main program
asks for license key. The address is given during
installation and is same in case of all Windows axle
measuring programs.
