1 690 326 006
2008-8-25
|
Robert Bosch GmbH
Operating System-Software | FWA 43xx / 44xx | 45
en
The fields in the display blocks has the following
significance:
Fields
Legend
ID
Does not have any significance in case
of KP and CPs and determines the
position in the vehicle in case of MPs:
"1" = front to the left
"2" = front to the right,
"3" = behind to the left,
"4" = behind to the right
Software
Displays the included Firmware version.
Serial No.
Display the serial number of the equipment.
Part No
Display the EDV number of the equipment.
Fab Date
Displays date of manufacture.
Version
Displays the equipment version.
Radio Channel
Displays the set radio channel.
PLD
Displays the version of the PLD
(Programmable Logical Device).
Calib Data
Displays the date of last calibration.
Fields in the display blocks
Tab. 5:
The channel number is smaller by 1 then the number
i
displayed in the CCD server. Example: Radio Channel
"0" is displayed as channel "1" on the CCD server.
Functions called via "Actions"
14.9.4
Options
Legend
Reconnect
It is searched for the
connected equipments in
the selected interface.
Reset Unit
The measuring box shall be
reset. This function should be
executed in case individual
sensor are not found.
Does not have function in
case of LAN interface.
Switch off the sensorheads
Connected radio sensor
are deactivated.
Clear data fields
Deletes all fields in
the display blocks.
Print Preview...
Page view.
Print...
Printer
Write Sensorhead Version
Is available only in
Service variants
Writes the content of
the field "Version" in the
EEPROM of the selected
measuring processors.
Options
Tab. 6:
Register card "Light exposure"
CCD line and transmitter-LED must be configured
optimally for exact measurement and must match.
The parameter used for it can be displayed here and if
required can be modified.
The parameters are saved in communication processor
and in the measuring processor and is displayed in
different display blocks (compare colour scheme in
case of "Type and version info") and should be changed
only after consultation.
CQ = camera transverse track, CL = camera
i
longitudinal track):
Significance of the fields in the display blocks
14.9.5
Options
Legend
CQ0CL0
Transmitter power for
level 0 (adjustment).
CQ1CL1
Transmitter power for
level 1 (short interval).
CQ2CL2
Transmitter power for level
2 (medium interval).
CQ3CL3
Transmitter power for
level 2 (big interval).
Current main level
Currently used
transmitter power.
Current left level
Currently used transmitter
power of the left transceiver
diode (if present).
Current right level
Currently used transmitter
power of the right transceiver
diode (if present).
CQ Toe ShutterCL Toe Shutter Exposure time of the
CCD sensor (Track).
CQ Camber LEDCL
Camber LED
Illumination and transmitter
time of the camber LED.
CQ Camber Shutter
CL Camber Shutter
Exposure time of the
CCD sensor (camber).
Threshold
Rejection threshold.
Avoiding image noise
through weak signals.
Fields in the display blocks
Tab. 7:
The functions that be called via "Actions" are
i
identical to the tab "Type and version info".
