1 690 326 006
2008-8-25
|
Robert Bosch GmbH
Operating System-Software | FWA 43xx / 44xx | 37
en
Maintenance function in the main
14.5
program
Select the function Maintenance in the program
¶
Version report
14.5.1
The version report gives the information about the
i
software status of the individual, installed program
and target data module:
Version report
Version printout
Date: 28.04.2008 14:04:01
Serial number Program Control
Serial number
LA0000045
Version Information Measurement System
Product Name
CCD 5000 /CCD
Measurement System
(TCP/IP)/1/
File Version
5.0/ 1100
Product Name
Demo Application/
Demo
File Version
5.0/ 1100
Version Information Program Control
Product Name
Aligner/ALIGNER/1/
File Version
5.0/ 1100
Example Version report
Tab. 1:
Equipment status
14.5.2
Runtime Tab
The Register Card Runtime gives information about
i
the measuring system event separated for program
runtime:
The protocol helps to quickly find the error cause.
i
There is information as to:
Logging the system configuration
R
Logging the system start
R
Information about e.g. non-accessible sensors
R
Information about e.g. interrupted working sections
R
Logging user actions
R
The tab "Runtime" displays the protocol of the
i
current program runtime.
The log of the last 10 Program starts is saved under:
i
C:\<program files>\FWA-CCD\WheelAligner\Aligner\
General\Runtime.
Register card General information
The tab "General information" displays the technical
i
data of the connected equipments e.g.,
Connection of the charging station
R
Connection of the sensors
R
Software version of the CCD servers
R
Supply voltage of the sensor
R
The software version of the charging station and the
i
sensors is not relevant here.
Abbreviation
Legend
OK
Everything is in order
S
Faulty Camber
U
Radiation interrupted
B
Battery service
C
No data transfer
E
EEPROM saving error
R
RAM - error
V
AD-converter, power supply
X
Battery alarm
T
Error during self test
Radio
Connection via radio
Cable
Connection via cable
Abbreviation of the connection analysis
Tab. 2:
