Bosch Divar DVR-16K Operation Manual Download Page 64

Page: 64 / 140

en | Connections and settings

Digital Video Recorder

F01U | 2.0 | 2008.12

User Manual

Bosch Security Systems

3.24.3 Beeper

Figure 3.47

Beeper setup menu

• Button

beeper

- On: Makes a sound when using the buttons.
- Off: Turns off the button beep.

• Input

beeper

- On: Makes a sound when a input is activated.
- Off: Turns off the input beeper.

• Motion

beeper

- On: Makes a sound when a motion is detected.
- Off: Turns off the motion beeper.

• System

beeper

- On: Makes a sound when a cooling fan is not activated or the HDD has a bad sector.
- Off: Turns off the system beeper.

Note:

The beeper is a low sound on this unit. If you want to make a loud sound,
connect an external alarming device to the output connecter (ext. siren).

Summary of Contents for Divar DVR-16K













































































































































Search results

Summary of Contents for Divar DVR-16K

Reviews:

Related manuals for Divar DVR-16K

Brands by name

Popular brands

Bosch Divar DVR-16K, Operation Manual

Search results

Summary of Contents for Divar DVR-16K

Reviews:

Related manuals for Divar DVR-16K

Brands by name

Popular brands