Bosch Divar DVR-16K Operation Manual Download Page 90

Page: 90 / 140

en | Control Center

Digital Video Recorder

F01U | 2.0 | 2008.12

User Manual

Bosch Security Systems

6.5 Live

Mode

6.5.1

Using the Camera View

Select the [Camera View] tab in the live mode.

Select the registered site name and double click the left mouse button or click the plus mark
of the registered site name.

Select [Cameras] and double click the left mouse button or click the plus mark.

Figure 6.7

Divar MR Control Center Window

Select the channel number you want to view.

Click the channel number and drag and drop to live window position.
If you select [Cameras] and drag and drop to a live window then all channels are displayed.

Live image is displayed in the selected window.

Figure 6.8

Camera View window

Repeat steps 3-5 to set the other live windows.

Notes:

• Configuration of camera view is set the first time only. This configura-

tion setup is memorized for the next time and displayed as it is.

• No audio available in live mode only in playback.

Summary of Contents for Divar DVR-16K













































































































































Search results

Summary of Contents for Divar DVR-16K

Reviews:

Related manuals for Divar DVR-16K

Brands by name

Popular brands

Bosch Divar DVR-16K, Operation Manual

Search results

Summary of Contents for Divar DVR-16K

Reviews:

Related manuals for Divar DVR-16K

Brands by name

Popular brands