Bosch Divar DVR-16K, Operation Manual

Page: 26 / 140

24
en | Connections and settings Digital Video Recorder
F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
• It is not possible to connect the VGA monitor and the composite monitor simultaneously.
Consequently, the user is obliged to choose either the composite monitor or the VGA monitor.
When set to composite monitor there is no VGA output. When set to VGA monitor there is no
composite output. Monitor B is unaffected by the monitor setting.
• This DVR is based on a VGA monitor using OSD. We recommend using the VGA monitor with
this unit. If you use a composite monitor, the OSD quality may lower to read it.
• User access rights:
User Level Administrator Advanced User Normal User
View Live Video YES YES YES
Alarm Off YES YES NO
PTZ YES YES NO
Instant Record YES YES NO
Export YES YES NO
Search/Play YES YES NO
Setup YES NO NO
Table 3.4
User access rights
3.12 Selecting the main monitor type
You can select the main monitor type to display the main screen during power on.
3.12.1 Using the VGA monitor
1. Connect the VGA monitor to the VGA connector on the back of the DVR.
2. Turn on the VGA monitor.
3. Press and hold the A ( ) button on the front panel until the beep sounds to display the
main screen. The DVR will restart and then the VGA monitor is set as a main monitor.
Figure 3.6 The A button on the front panel
3.12.2 CCTV (composite video type) monitor
1. Connect the CCTV monitor to the MON A connector on the back of the DVR.
2. Turn on the CCTV monitor.
3. Press and hold the B ( ) button on the front panel until the beep sounds to display the
main screen. The DVR will restart and the CCTV monitor is then set as main monitor.