Bosch Divar DVR-16K Operation Manual Download Page 29

Page: 29 / 140

Digital Video Recorder

Connections and settings | en

Bosch Security Systems

User Manual

F01U | 2.0 | 2008.12

3.14

Selecting live screen mode

3.14.1 Monitor

You can select the live screen mode to display a full, 4-view, 6-view, 8-view, 9-view or 16-view
screens on the main monitor.

1. Press

(

) button or click the

icon in the system control bar.

The screen mode select menu of monitor A is displayed on the monitor A.

2. Select

screen

mode.

Figure 3.9

The screen mode select menu of monitor A.

Selected channel of the monitor A.

Channel buttons: Press the 1 to 16 channel button to see the current camera images in

selected live screens on the monitor A.

Screen mode

• Full Screen Mode: When you see the selected channel on the full screen.
• 4, 6, 8, 9 and 16 view Mode: Displays selected multi screens on the monitor A.

Selected view mode.

Sequence: Views the all channels in sequence.

Select [OK (A)] and press ENTER to conﬁ rm your selection.

Note:

To display the screen you desire to watch in full screen mode, double click
the desired channel.

Summary of Contents for Divar DVR-16K













































































































































Search results

Summary of Contents for Divar DVR-16K

Reviews:

Related manuals for Divar DVR-16K

Brands by name

Popular brands

Bosch Divar DVR-16K, Operation Manual

Search results

Summary of Contents for Divar DVR-16K

Reviews:

Related manuals for Divar DVR-16K

Brands by name

Popular brands