Bosch Divar DVR-16K Operation Manual Download Page 59

Page: 59 / 140

Digital Video Recorder

Connections and settings | en

Bosch Security Systems

User Manual

F01U | 2.0 | 2008.12

3.23.3 Notification

Figure 3.42

Notification setup menu

• Alarm

on:

- On: Sends an e-mail when an input has been activated.
- Off:

Not

used.

• Motion

detect:

- On: Sends an e-mail when motion detection has been activated.
- Off:

Not

used.

• Disk

full:

- On: Sends an e-mail when the HDD has fully recorded.
- Off:

Not

used.

• Admin

changed:

- On: Sends an e-mail when the administrator password has changed.
- Off:

Not

used.

• Video

loss:

- On: Sends an e-mail when a video signal from the camera has stopped because of a cable

disconnection or malfunction of a camera.

- Off:

Not

used.

• Power

on/off:

- On: Sends an e-mail when power is on or off.
- Off:

Not

used.

Summary of Contents for Divar DVR-16K













































































































































Search results

Summary of Contents for Divar DVR-16K

Reviews:

Related manuals for Divar DVR-16K

Brands by name

Popular brands

Bosch Divar DVR-16K, Operation Manual

Search results

Summary of Contents for Divar DVR-16K

Reviews:

Related manuals for Divar DVR-16K

Brands by name

Popular brands