Measurement label
Function
raw_name
mV value of sensor
raw_name_fi
filtered mV value of sensor
name
physical value of sensor
name_fi
filtered physical value
Notice
Working with automatically created measurement sheets is ex-
plained in chapter ‘
Setting up an online measurement [
}
88]
’.
Configuring a multipoint adjustment
Example: Measurement of wheel force
▪ Physical property ‘wheel force’ not directly measureable
▪ Load transfer through suspension kinematics
▪ Physical value at sensor position defined by vehicle
▪ Curve definition by online adjustment at vehicle
Force at wheel
Force at sensor
1. Click on ‘Measurement Sources’ in the Toolbox.
2. Expand the list of ‘I/O Channels’ by clicking on ‘+’ in the DDU 7 Project Tree.
3. Drag the ‘Multipoint Adjustment’ analog signal source from the Toolbox and
drop it on the desired analog input channel in DDU 7 Project Tree.
Drag + Drop
10.3.4
Analog and Frequency Inputs | 10
Bosch Motorsport
DDU 7 Manual
75 / 160
Summary of Contents for DISBLAY DDU 7
Page 1: ...Display DDU 7 Manual V 1 2 11 14 2016 ...
Page 14: ...Mechanical Drawing 6 6 Mechanical Drawing 14 160 DDU 7 Manual Bosch Motorsport ...
Page 158: ......
Page 159: ......