1. Assign the desired mounting location (e.g. ‘Front’) and confirm by clicking
‘Apply’
2. The mounting location is now stored in the device. The device will do a reset
and the ‘RUN’ led on the device will change to green. The list will show the
new mounting location assignment.
It is good practice to physically label the M 60 with its mounting location.
Now the device is ready to be used.
A different coloring of the M 60 is used to indicate that the device is already con‐
figured in the currently loaded RaceCon project or not (white/orange).
Enhancements | 19
Bosch Motorsport
DDU 7 Manual
155 / 160
Summary of Contents for DISBLAY DDU 7
Page 1: ...Display DDU 7 Manual V 1 2 11 14 2016 ...
Page 14: ...Mechanical Drawing 6 6 Mechanical Drawing 14 160 DDU 7 Manual Bosch Motorsport ...
Page 158: ......
Page 159: ......