Starting up
Before starting
Install the software required DDU 7 operation. It is developed for Windows sys‐
tem software. Following software versions are used in this manual:
▪ DDU 7 setup, configuration and calibration: RaceCon
▪ Measurement data analysis: WinDarab V7
Set up the 100 Mbit Ethernet connection to the DDU 7.
▪ The Ethernet port has ‘cable auto crossover’ functionality
Setting up the network interface
The DDU 7 contains a DHCP server, network addresses can be assigned automat‐
ically to the configuration PC. The IP address of DDU 7 is 10.10.0.208.
1. Switch off the PC’s firewall.
2. Set up the PC’s network interface as shown in the screenshots.
Select
'Internet Protocol
(TCP/IP)'
Click
'Properties'
Select 'Obtain
an IP adress
automatically'
Click 'OK'
when done
Starting the unit
The DDU 7 powers up by turning on the ignition of the car. At startup the DDU 7
will display a Bosch logo.
7
7.1
7.1.1
7.1.2
Starting up | 7
Bosch Motorsport
DDU 7 Manual
15 / 160
Summary of Contents for DISBLAY DDU 7
Page 1: ...Display DDU 7 Manual V 1 2 11 14 2016 ...
Page 14: ...Mechanical Drawing 6 6 Mechanical Drawing 14 160 DDU 7 Manual Bosch Motorsport ...
Page 158: ......
Page 159: ......