D9412GV2/D7412GV2 |
Program Entry Guide | 2.0
GV2MAIN
EN
| 23
Bosch Security Systems | 5/05 | F001U003636B
Programming the Pager Phone Number
To program the pager phone number, enter the
number used to reach the pager, followed by pauses.
Entering C creates a three-second pause (example:
5552341CCC.)
Experiment with the number of pauses you add after
the page phone number. Each pause equals 3 seconds.
Try calling the pager yourself first and listening to the
length of time it takes to get a beep allowing you to
enter touch-tone information. This length is what you
must program after the pager’s phone number in
Section 2.1 Phone
on page 9 If you need a longer pause,
enter D after the number. Each D equals seven
seconds.
Using “#” characters in the phone number affects the
event’s display on the pager:
•
No “#” characters in phone number:
Dashes
appear in the display [1234-001-011-008].
•
One “#” character in phone number:
Dashes
are replaced by zeros [1234000100110008].
•
Two or more “#” characters in phone number:
Dashes appear in the display [1234-001-011-008].
For example, if the phone number 2773074#CC
(seven-digit pager phone number followed by “#” and
two pauses) is programmed, the pager message
appears as follows: [1234000100110008] (dashes are
replaced by zeros).
If the “#” is not placed in the phone number, the
message appears as follows: [1234-001-011-008]
A user might not want all four fields to show in the
pager message. Entering “*” characters in the phone
number allows the user to select the number of fields
to show in the pager message. To limit the number of
fields shown in the pager message, enter the
appropriate number of “*” characters in the phone
number as shown below:
•
Zero “*” characters in phone number:
Shows
all four fields.
•
One “*” character in phone number:
Shows
first field only.
•
Two “*” characters in phone number:
Shows
first two fields.
•
Three “*” characters in phone number:
Shows
first three fields.
•
Four or more “*” characters in phone number:
Shows all four fields.
For example, the phone number 2773074***CC (seven
digit pager phone number followed by three asterisks
and two pauses) produces the following pager display:
[1234-001-011] (three fields display at the pager).
Table 19
shows the description of each event, its
priority, and event number.
Table 19: Event Descriptions, Priorities, and
Numbers
Event Description
Event
Priority
Event
Number
Fire Alarm
001
011
Fire Restoral (after Alarm,
Supervision)
005 014
Fire Missing
005
013
Fire Trouble
005
012
Fire Supervision
005
124
Fire Restoral (after Tbl, Msg, Bypass)
005
015
Fire Cancel
004
027
Fire Supervision Missing
005
146
Fire Supervision Restore
005
123
Alarm Report
003
016
Burg Restore
006
018
Duress 002
004
Missing Alarm
006
019
User Code Tamper
008
055
Trouble Report
006
017
Missing Trouble
008
020
Non-Fire Supervision
006
078
Point Bus Fail
006
024
Point Bus Restoral
006
091
Non-Fire Cancel
004
045
Alarm Restore
006
026
Supervision Missing
008
147
Unverified Event
006
169
Point Bypass/Command Bypass
007
007
Forced Point
007
008
Point Opening
008
021
Point Closing
008
022
Was Force Armed
007
034
Fail To Open
008
040
Fail To Close
008
041
Extend Close Time
008
044
Opening Report
008
047
Forced Close
007
048
Closing Report
008
050
