D9412GV2/D7412GV2 |
Program Entry Guide | 2.0
GV2MAIN
EN
| 38
Bosch Security Systems | 5/05 | F001U003636B
Area
Default:
1
Selection:
1 to 8
Enter the area number you are programming.
A# Fire Time
Default:
5 minutes
Selection:
1 minute to 90 minutes
Enter the number of minutes the bell rings for Fire
Alarm points. The relay activated for this time is
programmed in
A# Fire Bell
in Area Relays.
The bell output begins as soon as the fire alarm occurs.
It shuts off the bell when the programmed number of
minutes expires.
If programmed for 1 minute, the output can be
anywhere from 0 to 60 seconds of bell time. Program
Fire Time for 2 minutes or more to ensure you have
ample output time.
Check with your AHJ to determine the
appropriate bell time for your
geographical area.
A# Fire Pat
Default:
Pulse
Selection:
Steady, Pulse, CaStnd, TmCod3
Steady Steady
Output
Pulse
Pulse March Time
120 beats per minute, at an even
tempo
CaStnd California
Standard
10 seconds On + 5 seconds Off + 10
seconds On + 5 seconds Off. This
sequence repeats until bell time
expires.
TmCod3
Temporal Code 3
0.5 seconds On, 0.5 seconds Off, 0.5
seconds On, 0.5 seconds Off, 0.5
seconds On, 1.5 seconds Off; pattern
repeats. This sequence repeats for a
minimum of 3 minutes and with a ±
10% tolerance.
Select the bell pattern this area uses to signal an alarm
on a Fire point.
Press the [Space] bar to scroll through the selections.
Press [Enter] when the correct selection appears in the
display.
When an alarm occurs on two Fire points
sharing the same relay, the bell pattern of
the most recent fire event takes
precedence.
A# Burg Time
Default:
6 minutes
Selection:
One minute to 90 minutes (in one-
minute increments)
Enter the number of minutes the bell rings for
Burglary Alarm points. The relay activated for this
time is programmed in
A# Alarm Bell
in Area
Relays.
The bell output begins as soon as the burglary alarm
occurs. It shuts off the bell when the programmed
number of minutes expires.
When the control panel’s internal clock begins a new
minute, it considers the first minute expired. Program
Burg Time
for two minutes or more.
Check with your AHJ to determine the
appropriate bell time for your
geographical area.
A# Burg Pat
Default:
Steady
Selection:
Steady, Pulse, CaStnd, TmCod3
Select the bell pattern this area uses to signal an alarm
on a Non-fire point.
Press the [SPACE] bar to scroll through the selections.
Press [ENTER] when the correct selection appears in
the display.
