Bosch CL200, User Manual

Page: 116 / 159

R200, R200P, COM2-E Communication Modules
11–2
1070 072 145-102 (01.07) GB
Module variants
Three types of communication modules are available:
D
R200 featuring V.24 interface and V.24 / 20 mA combination interface
D
R200P featuring RS-485 PROFIBUS interface
D
COM2–E featuring Ethernet interface
Max. number in a given controller
A maximum of three communications modules – of one type or of any combi-
nation – may be included in the hardware configuration of a single controller.
11.1.1 R200 Communication Module
The R200 communication module comprises one of the CL200 system mo-
dules. It is used to connect the CL200 to other Bosch control units and other
types of intelligent devices.
Interfaces
The R200 provides two interfaces:
D
V.24 interface
D
V.24 / 20mA combination interface
Both interfaces can be operated simultaneously, and each interface features
its own 7-segment for status indication.
Transmission protocols
The R200 supports the following transmission protocols:
D
BUEP19E
D
BUEP3E
D
BUEP64
The BUEP19E protocol conforms to the DIN 66 019 standard. It controls the
data traffic handled via serial interface between programmable memory
controllers and peripheral devices. The data interchange transactions are
protected against loss of data.
The BUEP03E protocol is a simple ASCII protocol for data transmission via
serial interface between programmable memory controllers and peripheral
devices.
The BUEP64 protocol is used to handle the data exchange between com-
plex or spatially distributed controller systems.
Connectivity options
On the basis of the listed transmission protocols, the R200 provides the follo-
wing connectivity options:
D
Computer (PC, host computer, etc.)
D
CL150, CL200, CL400, CL500