Bosch CL200, User Manual

Page: 129 / 159

Analog Output Modules
13–3
1070 072 145-102 (01.07) GB
Actuators are connected via push-lock terminals.
The output module requires an external 24 V power supply.
13.2 Specifications
Specifications A ana A10 ana (4 outputs) A10 ana (8 outputs) A20 ana
Order no. 1070 077 138 1070 078 507 1070 078 295 1070 078 914
Outputs 2 4 8 4
Voltage rated output
D
Voltage range
D
Load resistance
D
Short-circuit current
–10 t10 V
w
1 k W
15 mA
0 through 10 V
w
1 k W
–
Current rated output
D
Current range
D
Load resistance
4 through 20 mA
v
625 W
– 0 through 20 mA
0 through 24 mA
4 through 20 mA
v
625 W
Setup time, full amplitude 3 ms Ohmic load: 50 m s
Capacitive load: 4 ms
3 ms
Digital mapping 16-bit, straight binary 12-bit, straight binary 16-bit, straight binary
Temperature coefficient
"
0.005 %/K
Current draw from
D
7.5 V ex NT200
D
24 V power supply
80 mA
100 mA 60 mA
100 mA 60 mA
200 mA max. 70 mA
max. 200 mA
Push-lock connector
D
Cable cross-section
D
max. terminal current
max. 1.5 mm
2
6 A
max. 1.5 mm
2
max. 1.5 mm
2
max. 1.5 mm
2
Cable length max. 200 m, screened
Width 1 slot
Suitable module slots
1 2 3 4 5 6 7
Basic unit
Module slots
1 2 3 4 5 6 7
Expansion unit