Bosch CL200, User Manual

Page: 13 / 159

Safety Instructions
1–5
1070 072 145-102 (01.07) GB
1.5 Safety instructions for the described product
DANGER
Fatal injury hazard through ineffective Emergency-STOP devices!
Emergency-STOP safety devices must remain effective and accessi-
ble during all operating modes of the system. The release of functio-
nal locks imposed by Emergency-STOP devices must never be allo-
wed to cause an uncontrolled system restart! Before restoring power
to the system, test the Emergency-STOP sequence!
DANGER
Danger to persons and equipment!
Test every new program before operating the system!
DANGER
Retrofits or modifications may interfere with the safety of the pro-
ducts described hereunder!
The consequences may be severe personal injury or damage to
equipment or the environment. Therefore, any system retrofitting or
modification utilizing equipment components from other manufac-
turers will require express approval by Bosch.
DANGEROUS ELECTRICAL VOLTAGE
Unless described otherwise, maintenance procedures must always
be carried out only while the system is isolated from the power sup-
ply. During this process, the system must be blocked to prevent an
unauthorized or inadvertent restart.
If measuring or testing procedures must be carried out on the active
system, these must be carried out by trained electricians.
CAUTION
Danger to the module!
Do not insert or remove the module while the controller is switched
ON! This may destroy the module. Prior to inserting or removing the
module, switch OFF or remove the power supply module of the con-
troller, external power supply and signal voltage!
CAUTION
Only Bosch-approved spare parts may be used!