Bosch CIP-5316-JBOD User Manual Download Page 61 | Manualshive

Page: 61 / 68

background image

CIP5000 series storage

Troubleshooting | en

61

Bosch Security Systems B.V.

User manual

2019-10 | V01 | F.01U.380.030

Enable Media Patrol

–

To enable Media Patrol, click

Background Activities

in the Quick Links menu on the

Home

page; or click the

Subsystem

in the tree view, and then click the

Background

Activities

menu tab. Click to check the

Enable Media Patrol

option.

Please be noted that the

Auto Rebuild

option is also there. Make sure this option is enabled if

you want to automatically start rebuilding a logical drive immediately after the failed drive is
replaced.
–

To start

Media Patrol

manually, click the menu expander on the right side of the

Background Activities

tab, scroll down and select

Start Media Patrol

to view the Start

Media Patrol menu. Then click the

Start

button.

–

To schedule

Media Patrol

, click the menu expander to the right of the Scheduler tab,

scroll down, and select

Add Media Patrol Schedule

to open the Schedule menu. Use this

menu to add a media patrol schedule.

21.2

Rebuild a disk array

When you rebuild a disk array, actually you are rebuilding the data on a physical drive.
–

In the event of a physical drive failure in a disk array, if a sufficient spare drive is
available, the disk array automatically begins to rebuild using the spare drive.

–

If there is no spare drive with sufficient capacity, but the Auto Rebuild function is
enabled, the disk array starts rebuilding automatically after the failed physical drive is
removed and an unconfigured physical drive is installed in the same slot.

–

If there is no spare drive with sufficient capacity and the Auto Rebuild function is
disabled, you must replace the failed drive with an unconfigured physical drive and
perform a Manual Rebuild.

21.2.1

How to rebuild a disk array

When the logical drive is downgraded or in a critical state, you need to rebuild the array that
contains the drive. If you do not use Auto Rebuild (a spare drive is required), you must rebuild
the array manually after the affected drives have been replaced. Obey the instructions
described here to rebuild a disk array.
By looking at the operational status in the

Logical Drives Information

display, you get to know

whether the logical drive is in a critical state.

«
...
59
60
61
62
63
...
»

Summary of Contents for CIP-5316-JBOD





































































Reviews:

No comments

Related manuals for CIP-5316-JBOD

Brand: Eastwood Pages: 8

Brand: MSW Pages: 7

Brand: Verbatim Pages: 52

Brand: Dancover Pages: 36

Brand: IBM Pages: 141

STORE-IT-OUT ARC

Brand: Keter Pages: 8

Brand: Keter Pages: 41

FireWire CardBus PC Card

Brand: Western Digital Pages: 16

SO READY Secure

Brand: DANE-ELEC Pages: 2

Brand: ABSCO SHEDS Pages: 21

N3/C1 FRAME KIT

Brand: ABSCO SHEDS Pages: 22

PREMIER 30232GECOK

Brand: ABSCO SHEDS Pages: 25

Brand: Karibu Pages: 42

Brand: Promise Technology Pages: 38

Brand: Zappiti Pages: 8

Brand: MasterCraft Pages: 28

Caviar WD1200JD

Brand: Western Digital Pages: 2

6882.468 53305014

Brand: Haussmann Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands