Bosch CIP-5316-JBOD User Manual Download Page 19

Page: 19 / 68

CIP5000 series storage

Hardware configuration | en

Bosch Security Systems B.V.

User manual

2019-10 | V01 | F.01U.380.030

Caution!

Do not install the enclosure hardware into a rack without rails to support the system.

Caution!

Only a qualified technician who is familiar with the installation procedure should mount and
install the enclosure hardware.

Caution!

Mount the rails to the rack using the appropriate screws and flange nuts, fully tightened, at
each end of the rail.

Caution!

Do not load the rails unless they are installed with screws as instructed.

Caution!

The rails available for the CIP enclosure hardware are designed to safely support that CIP
enclosure hardware when properly installed. Additional loading on the rails is at the
customer’s risk.

Caution!

Bosch cannot guarantee that the mounting rails will support your CIP enclosure hardware
unless you install them as instructed.

Install the enclosure to the rack using the optional rails.

Notice!

To lighten the enclosure, you can remove the power supplies. Replace the power supplies
after the unit is mounted on the rack.

Notice!

For more information on rack mounting, refer to the Quick Installation Guide for rail
assembly.

Summary of Contents for CIP-5316-JBOD





































































Search results

Summary of Contents for CIP-5316-JBOD

Reviews:

Related manuals for CIP-5316-JBOD

Brands by name

Popular brands

Bosch CIP-5316-JBOD, User Manual

Search results

Summary of Contents for CIP-5316-JBOD

Reviews:

Related manuals for CIP-5316-JBOD

Brands by name

Popular brands