manualshive.com logo in svg

Bosch CIP-5316-JBOD, User Manual, Page: 11 / 68

Share
Download
Bosch CIP-5316-JBOD User Manual Download Page 11

CIP5000 series storage

Hardware | en

11

Bosch Security Systems B.V.

User manual

2019-10 | V01 | F.01U.380.030

Drive carriers

Power and Status LEDs

Figure

 

4.2: CIP-5424W-00N front view

4.1.2

Front panel of CIP-5316-JBOD

The front panel hardware components on the CIP-5316-JBOD is nearly the same as
CIP-5316W-00N. However, there is no power button, USB ports and OPAS LED on the left
handle of CIP-5316-JBOD enclosure.
The hard disk status and hard disk activity indicators on the hard drive carriers have the same
functions as those on CIP-5316W-00N enclosure.
The LEDs of power, system status, global hard disk activity, and system heartbeat indicator on
the right handle have the same functions as those of CIP-5316W-00N.

4.1.3

Front panel LEDs

With the power supplies connected, the system can now be powered on.
To power on the subsystem, press the power button on the left handle, then observe OPAS
LED on the left handle and LEDs on the right handle.

USB ports

OPAS LED

Power button

Figure

 

4.3: Front panel components on the left handle

Summary of Contents for CIP-5316-JBOD





































































Reviews:

No comments