Bosch CIP-5316-JBOD, User Manual

Page: 44 / 68

44 en | User management CIP5000 series storage
2019-10 | V01 | F.01U.380.030 User manual Bosch Security Systems B.V.
3. Locate the path where you want to save the file on the Host PC, and click the Save button
in the pop-up menu.
–
The report is saved to your Host PC as a compressed HTML file.
4. Double-click the downloaded file to extract it.
5. Double-click the report to open it in your default browser.
The service report includes the following topics:
–
About - Report utility
– BBM Info - Bad Block Manager
– BGA Summary - Status and settings
– Buzzer Info
– Controller Info
– Disk Array Info
– Disk Array Dump info
– Disk Array Verbose Info
– Enclosure Info
– Error Table Info
– Event Info - NVRAM
– Event Info - Runtime
– LogDrive Info - Basic logical drive information
– LogDrive Dump Info - Diagnostic information
– Logical Drive Verbose Info - Full logical drive information
– Network Info - Virtual port
– Phydriv Info - Basic physical drive information
– Phydriv Verbose Info - Full physical drive
– SWMGT Info - Software management
– Service Setting - Email
– Service Setting - Webserver
– Spare Info - Basic spare drive information
– Spare Dump Info - Diagnostic information
– Spare Verbose Info - Full spare Drive information
– Statistic Info
– Subsystem info
– User Info
12.6 Email service
Email service enables the RAID subsystem to send you Email messages about events and
status changes. By default, Email service is set to Automatic.
12.6.1 Stop Email service
To stop the Email service:
1.
Click the Administrative Tools icon.
2. Click the Software Management icon.
3. Click on Email in the Service List of the Service Management menu.
4. Click the Stop button under Service Status -- Email.
5. Click the Confirm button.
To start the Email service after stopping it:
1.
Click the Administrative Tools icon.
2. Click the Software Management icon.
3. Click on Email in the Service List of the Service Management menu.
4. Click the Start button under Service Status -- Email.