3.
Ensure that the mounting plate is secure.
Attach the Pendant Arm to the Mounting Plate
The bottom hinge pin of the Pendant Arm is provided with a Hinge Pin Stop to hold the hinge
open while attaching the arm to the Mounting Plate.
1.
Compress the bottom hinge pin by pushing the pin lever downward and rotating it behind
the Hinge Pin Stop.
Figure 8.9: Connect Pendant Arm to Mounting Plate
2.
Open the top hinge by pushing its pin lever up and holding it.
Note: Both Hinge Pins must be fully compressed to open (unlock) the hinges of the
Pendant Arm and before proceeding to the next step.
3.
While continuing to hold the top hinge pin open, align the top and bottom hinges of the
Pendant Arm to their mating points on the Mounting Plate.
AUTODOME 7000
Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts | en
35
Bosch Security Systems, Inc.
Operation Manual
2014.04 | 2.0 | F.01U.283.679
