If you connect via Web browser, you must activate the audio transmission on the LIVE
Functions page. (See LIVE Functions, page 93.) For other connections, the transmission
depends on the audio settings of the respective system.
Audio
The audio signals are sent in a separate data stream parallel to the video data, and so increase
the network load. The audio data are encoded according to G.711 and require an additional
bandwidth of approximately 80 kbps for each connection. If you do not want any audio data to
be transmitted, select Off.
Input volume
You can set the input volume with the slider (from 0 to 31, with 0 as the default).
Line In
You can set the line input gain with the slider (from 0 (zero) to 79, with 0 as the default).
Make sure that the display does not go beyond the green zone during modulation.
Line Out
You can set the line output gain with the slider (from 0 (zero) to 79, with 0 as the default).
Make sure that the display does not go beyond the green zone during modulation.
Recording format
Select a format for audio recording. Select L16 or AAC (Advanced Audio Coding) if you want
better audio quality with higher sampling rates. Note that the L16 standard requires
approximately eight times the bandwidth of the format G.711.
Pixel Counter
Counts the number of pixels in a defined image area. The pixel counter allows the installer to
easily verify that the camera installation fulfills any regulatory or specific customer
requirements, for example, calculating the pixel resolution of the face of a person passing a
doorway monitored by the camera.
Advanced Mode: Recording
Storage Management
You can record the images from the camera on various local storage media (user-supplied SD,
SDHC, or SDXC memory card) or on an appropriately configured iSCSI system.
It is also possible to let the VRM Video Recording Manager control all recording with accessing
an iSCSI system. This is an external program for configuring recording tasks for video servers.
For further information please contact your local customer service at Bosch Security Systems
Inc.
Device manager
If you activate the Managed by VRM option in this screen, the VRM Video Recording Manager
will manage all recording and you will not be able to configure any further settings here.
14.23
14.24
14.25
AUTODOME 7000
Configuration via IP, Advanced Mode | en 107
Bosch Security Systems, Inc.
Operation Manual
2014.04 | 2.0 | F.01U.283.679
