AutoDome 600 Series Analog PTZ Camera
On-Screen Display Menu Navigation | en
21
Bosch Security Systems, Inc.
User Manual
F.01U.270.005 | 2.0 | 2012.06
Rule # Choices:
Menu
Description
Sub-menu / Description
Default
Setting
Exit
Saves and exits the menu.
Enabled
Turns the rule on or off after its
inputs and outputs have been
defined.
YES
to enable or
NO
to disable
NO
Input
Toggles through a list of valid
inputs set in the
Alarm I/O Setup
> Inputs Setup Menu
that define
the rule's inputs. A rule can have
up to four (4) inputs.
Alarm Inputs 1 – 7
and any additional inputs which
were set in the
Inputs Setup Menu
, including
Aux
On/Off (1-99), Shot, and NONE
.
NONE
Output
Toggles through a list of valid
outputs set in the
Alarm I/O Setup
> Outputs Setup Menu
that
defines a rule's outputs.
Alarm Outputs 1 – 3
and any additional outputs set
in the
Outputs Setup Menu
including:
Alarm Relay,
Aux On/Off (1-99), Shot, OSD, Transmit, and
NONE
.
Some outputs, such as
Alarm Outputs 1-3, Alarm
Relay, and Aux On/Off
can be set to be active for a
specific duration of time as follows:
Seconds
: 1-5, 10, 15, or 30
Minutes
: 1-5 or 10
Latched
: The alarm stays active until acknowledged.
Follows
: The alarm follows the alarm rule.
NONE
NOTICE!
You can include up to four (4)
Input
and
Output
events in a single rule. Each input and output,
however, must be true for the alarm's rule to be valid and enabled.
Summary of Contents for AutoDome 600 Series
Page 1: ...AutoDome 600 Series Analog PTZ Cam era VG5 600 Series en User Manual ...
Page 2: ......
Page 73: ......
