Bosch AutoDome 600 Series User Manual Download Page 31

Page: 31 / 74

AutoDome 600 Series Analog PTZ Camera

Alternative Control Protocols | en

Bosch Security Systems, Inc.

User Manual

F.01U.270.005 | 2.0 | 2012.06

Move the joystick right to highlight

Continue

. Then, press the

FOCUS

or the

IRIS

button.

The AutoDome automatically reads the correct Address sent by the controller and is

displayed as

Save ## as FastAddress

(

is based on either 1-64 AD/Manchester or 1-99

AD/Sensormatic RS-422). It is NOT POSSIBLE to change the address that is displayed.

The following options are available:

–

Press the

FOCUS

or the

IRIS

button to store the FastAddress number.

–

Move the joystick to highlight

Clear Current FastAddress

and then press the

FOCUS

or the

IRIS

button to clear any currently saved Fast Address.

–

Move the joystick to highlight

Exit Without Change

to exit the FastAddress menu

without saving any changes.

NOTICE!

If the user does not enter the exact manufacturer Unique Identifer as displayed on-screen, the

FastAddress can not be set and the only option available is to Exit the menu.

Enter FastAddress

FastAddress:

Not Set

Unique Identifier:

200668

200668
r

Continue...
Exit...

Joystick: Match Identifier

FastAddress

FastAddress:

Not Set

Save “##” as FastAddress
Clear Current FastAddress
Exit Without Change

Focus/Iris: Select

Summary of Contents for AutoDome 600 Series











































































Search results

Summary of Contents for AutoDome 600 Series

Reviews:

Related manuals for AutoDome 600 Series

Brands by name

Popular brands

Bosch AutoDome 600 Series, User Manual

Search results

Summary of Contents for AutoDome 600 Series

Reviews:

Related manuals for AutoDome 600 Series

Brands by name

Popular brands