26
en | Common AutoDome User Commands (unlocked)
AutoDome 600 Series Analog PTZ Camera
F.01U.270.005 | 2.0 | 2012.06
User Manual
Bosch Security Systems, Inc.
3
Common AutoDome User Commands (unlocked)
This chapter details the commonly used Bosch keyboard setup commands. See
Section 6 Keyboard Commands by Number, Page 41, for a complete list of commands.
3.1
Setting AutoPan Mode
AutoPan
mode pans the AutoDome camera 360º or pans between user defined limits (when
programmed). The AutoDome camera continues to pan until stopped by moving the joystick.
To pan 360º:
1.
Press
ON-1-ENTER
.
2.
Move the joystick to stop the pan.
To set left and right pan limits:
1.
Move the camera to the starting position and press
SET-101-ENTER
to set the left limit.
2.
Move the camera to the end position and press
SET-102-ENTER
to set the right limit.
To start AutoPan between limits:
1.
Press
ON-2-ENTER
.
2.
Move the joystick to stop the pan.
3.2
Setting Preset Shots
Preset shots are saved camera positions. Shots are saved as scenes, therefore, the terms
SHOT
and
SCENE
are used interchangeably.
To set a Shot:
1.
Move the camera to the position you want to save.
2.
Press
SET-#-ENTER
where
#
can be a number from 1 to 99 that identifies the camera
position of the scene.
3.
To specify a title for the shot, see the procedure below.
To view a Shot:
Press
SHOT-#-ENTER
where # is the number of the scene position you want to view.
To store or clear a Shot:
1.
Press
SET-100-ENTER
to access the
Store/Clear Scene Menu
.
2.
Follow the on-screen instructions.
To disable overwrite confirmations:
If you overwrite a preset shot the AutoDome issues a confirmation message prompting you
approve the overwrite. To disable this confirmation message issue the
OFF-89-ENTER
command.
Summary of Contents for AutoDome 600 Series
Page 1: ...AutoDome 600 Series Analog PTZ Cam era VG5 600 Series en User Manual ...
Page 2: ......
Page 73: ......
