AutoDome 600 Series Analog PTZ Camera
Advanced Features | en
51
Bosch Security Systems, Inc.
User Manual
F.01U.270.005 | 2.0 | 2012.06
7.5
Motion Detection with Region of Interest
(Preset positions 90 through 99)
With the VG5 Series AutoDome, the motion detection software can be configured to create a
Region of Interest within multiple preset positions or scenes. It can take advantage of Virtual
Masking to ignore motion in predefined areas. Motion Detection can also be used as an Alarm
Rule input.
Preset positions 90 through 99 are reserved for programming motion detection scenes.
To set up a scene with Motion Detection:
1.
Choose an unused Preset position from 90 to 99. For this example use Preset scene 95.
2.
Enter the keyboard command
SET-95-ENTER
.
3.
Select
YES
at the Apply Motion Detection? prompt. (If NO is selected, the Preset scene
does not activate Motion Detection.)
4.
Select
YES
at the Apply Region of Interest? prompt. (If NO is selected, the entire scene is
used for Motion Detection.)
5.
Follow the on-screen menu instructions to construct the shape of the screen area you
want to detect motion within.
7.6
Image Stabilization
Image Stabilization becomes increasingly important as zoom ranges are extended. The
advanced image stabilization algorithms of the VG5 Series AutoDome eliminate camera shake
for exceptional image clarity. Bosch achieves this clarity without reducing camera sensitivity
or picture quality.
–
To configure image stabilization, open the
Main
menu, select the
Advanced
menu, and
then select
Stabilization
to turn on the feature.
–
In Pelco Mode open the
Main
menu, select the
Advanced
menu, and then select
Stabilization
to turn on the feature.
7.7
Pre-position Tour
The VG5 Series AutoDome features (2) preset tours. Each preset scene is saved for playback
later.
Tour 1 is a standard tour that only recalls the scenes in the exact sequence they were shot.
Scenes can be added or deleted on the tour, but the sequence cannot be changed. To add or
remove scenes on Tour 1 enter the keyboard command
SHOT-900-ENTER
and follow the on-
screen instructions.
Tour 2 is a customizable tour that allows you to rearrange the sequence of scenes on the tour
by inserting and deleting scenes. To enter the Edit Tour 2 menu, enter the keyboard command
SET-900-ENTER
and follow the on-screen instructions.
NOTICE!
Motion Detection always takes precedence over AutoTrack object tracking.
NOTICE!
Up to five (5) anchor points can be used to form the area which you want to detect
motion within. Motion Detection is not activated until the Preset scene is recalled. The Motion
Detection icon "M" appears in the upper left-hand corner of the display.
Summary of Contents for AutoDome 600 Series
Page 1: ...AutoDome 600 Series Analog PTZ Cam era VG5 600 Series en User Manual ...
Page 2: ......
Page 73: ......
