ACS 653, ACS 663 Service Manual
SP00D00624
2021-04-08
Robert Bosch GmbH
22
Introduction
Figure 1-12. Front plastic cover removal
7. Remove the refrigerant identifier filter
cover from the right side of the machine by
pressing it.
8.
Remove the cap (3).
9. Place the contamination port (5) with its
o’ring and tighten at 15 Nm torque.
10. Place the Schrader valve in it (4) and tighten
at 0.35 Nm torque.
1
1
1
2
2
Figure 1-13. Contamination port assembly
5
3
4
11. Remove the brass cap from the manifold (7)
and place the solenoid body (6). Tighten at
9 Nm torque.
12. Tighten the solenoid coil (6) at 4 Nm torque.
13.
Fix the refrigerant identifier (12) by 2 screws
as per Figure 1-14. Tighten at 0,4 Nm torque.
Figure 1-14. Refrigerant identifier assembly
8
6
11
10
12
7
9
14.
Remove the cap (8) from the manifold (7).
15.
Fix the hose with fitting coming with the
refrigerant identifier in (8) and tighten at
7.5 Nm torque. Plug the other end of the
hose to fitting (11) of refrigerant identifier
(12) and tighten it.
16. Connect S17 faston harnesses to the
Solenoid faston contacts (6).
17. Connect the IDPWR end of power supply
harness from the power box to the connector
(10) of the refrigerant identifier (12).
